In this video I explain how I used stock aluminum purchased from ebay to build an adjustable rail system for any camera. The rig is made up of a few cheap brackets from Adorama, aluminum rails, solid 3/4″ aluminum block, 1/4″ tap and a few thumb screws. This project cost $80 to build including the $30 shoulder support and requires a drill press for proper alignment of the aluminum rails.

Thumb Screws 4 for $1.04
C- Shaped Bracket
L- Bracket Handles
3/4 Aluminum Bar
Aluminum Flat Bar
Aluminum Rails
$30 Shoulder Support

DV Rebellion